CNC Engraving Machine Essentials: A Comprehensive Guide
Material Type: Metals and non-metals have vastly different machining characteristics.Controlling chip accumulation to prevent damage to electrical components and guideways.Coolant plays a crucial role in m
Advanced Titanium Alloys: Properties, Applications, and Research
In the 1980s, two US companies developed Alloy C (Ti-1270), a titanium alloy insensitive to sustained combustion. This alloy has high room-temperature strength and good room-temperature and high-temperature
Ultra-High Strength Steels: A Comprehensive Overview
With a strength level of 780 MPa, this hot-rolled steel sheet is characterized by its high ductility, hole expansion ratio, excellent flange formability, and stable mechanical properties. It finds exte
Intermetallic Compounds: A Deep Dive into High-Performance Materials
In the automotive industry, IMCs are being explored for components such as turbocharger rotors, exhaust valves, and engine valves, aiming to improve engine efficiency and reduce emissions.By incorporating silic
Advanced Composite Materials: Revolutionizing Industries
Beyond aerospace and missile technology, composite materials have found widespread use in diverse industries:Developing cost-effective manufacturing processes and utilizing more affordable raw material
Transformers of magnesium alloy: Lightweight Pioneer in the field of aerospace
Higher than the rigidity: the unit weight is higher, which is conducive to improving the stability of the structure.The application of magnesium alloy in the field of aerospaceAs a lightweight material with huge pote
Stainless Steel-304 material's usage in CNC fabrication
The alloy elements are not dissolved into the matrix, resulting in low alloy content in the matrix structure and poor corrosion resistance.Longitudinal elastic modulus (20℃, KN/mm2)2440*1220magneticThere may be several reasons for the r
Cold rolled sheet-SPCC material
※ Some data comes from the Internet and is for reference only2440*1220Maximum processable sizePart 3The surface of SPCC is not protected and is easily oxidized when exposed to air, especially in a humid environment, c
Galvanized sheet-SGCC material
Automobile manufacturing, electrical appliances, etc.Laser marking1.2Electro-galvanized steel sheet is a stamping material that is made by coating the surface of cold-rolled sheet with zinc.2.5effectSGCCTensile Strength (TS)2440*1
Aluminum Alloy-5052 material
351.0GR20Elastic modulus (E)2440*12201.22.0Formability5052 aluminum alloy belongs to Al-Mg alloy series, which is widely used, especially in the construction industry, and is one of the most promising alloys. It has good
Stainless Steel-201 material usage in CNC fabrication
China mainly has the following 200 series steel grades: J1, J3, J4, 201, 202, and later there were 200 steel grades with lower nickel content control. As for 201C, it is an extended steel grade of 201 developed by some
Bakelite Material used in CNC factory
The advent of Bakelite is of great significance to industrial development.1. It has good moldability, but its shrinkage and orientation are generally greater than those of amino plastics , and it contains water a
- «
- 1
- »
Beyond aerospace, IMCs are finding increasing use in other key sectors:
The primary challenge associated with NiAl is its inherent brittleness. However, ongoing research focuses on mitigating this issue through various approaches, including alloying, micro-alloying, and optimized cnc processing techniques, which can improve its toughness and broaden its applicability.
High Hardness and Strength: Providing resistance to wear and deformation.